The internal pattern generator can be used to calibrate the LG 2019 OLED and NanoCell LCD TVs in SDR, HDR, and Dolby Vision modes.
CalMAN Compatible LG TV
- Alpha 9 Gen 2
- OLED R9 Z9 W9 W9S E9 C9 B9
- NanoCell SM99
- Alpha 7 Gen 2
- NanoCell LCD
- Alpha 9 Gen 2
Note: The internal pattern generator cannot be used to collect pre/post calibration verification data for reporting in HDR or Dolby Vision modes, but can be used to complete HDR and Dolby Vision calibrations.
To use the internal pattern generator, you need to put the display into the appropriate SDR/HDR/Dolby Vision mode. Display content in the target format on the active input to put the display into SDR/HDR/Dolby Vision mode. This can be done by using an HDR10 or Dolby Vision Blu Ray disc, or by using the gray screen media files below.
Right-click and choose "Save As" to download the grey screen media files from the links below...
This content can be loaded onto a USB drive and played directly on the TV using the built-in media player.
To Connect to the LG Internal Pattern Generator:
- Connect to your LG TV
- Connect the CalMAN computer to the same network to which the LG TV is connected.
- Under Menu\Network\ note the IP address.
- On the Source Settings tab, click the Find Source button
- On the Find Source dialog, Choose LG
- Enter your TV's IP Address into the connection dialog box, and click Connect
7. When prompted, enter the 8 digit passcode displayed on the TV (Note: This step will not occur if you have already connected to the TV as a Display)